Spirit System
https://www.spirit-system.com/phpBB3/

3 Bladed Head Oxy 3 Set UP
https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=1480		 Page 1 of 1
Author:  nixtrix71 [ Tue 14. Jun 2016 7:49:21 ]
Post subject:  3 Bladed Head Oxy 3 Set UP
Hi All,

I was wondering if any out there is using the Spirit with the Oxy 3 Cube which has the 3 Bladed head system.
I am just about to set up mine and before doing so was hoping someone out there has already done so and could maybe help with the general set up, before tweaking :roll:

Hope someone has knowledge about this and maybe is the same as the normal set up but just to be sure :D

Thanks to the team and support and for the great FBL system.

Nik
Author:  ZeXx86 [ Tue 14. Jun 2016 7:58:58 ]
Post subject:  Re: 3 Bladed Head Oxy 3 Set UP
Hi,

yes, there are some pilots with this setup. In the Support settings there were some questions, but overall there is nothing special in the settings.
It is very similar to 2 bladed setup. Gyro Gains can be decreased little bit.
Author:  nixtrix71 [ Tue 14. Jun 2016 10:58:05 ]
Post subject:  Re: 3 Bladed Head Oxy 3 Set UP
Thanks will go ahead with the set up.
Will try standard and if need play a bit with the gains :mrgreen:
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/