It is currently Thu 28. Mar 2024 19:18:08

All times are UTC + 1 hour





Post new topic Reply to topic  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Stabi Rescue
PostPosted: Thu 13. Feb 2020 15:44:02 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
HI
Ihave a spektrum dx9 and i use channel 8 and switch A to activate stabi rescue.I also use bankswitching
from F-mode switch ch 7,and i have set it up like this.Bank0 stabi normal for takeoff and landing,bank1 rescue normal,bank2 rescue normal.
The problem is that i forgot after takeoff to deactivate switch A,and Changes F-mode to 1(bank1)and the heli
starts to climb higher and higher until i manages to switch off switch a and go into normal flight.
Is there a possibility to prevent this happens if i forgot to switch off sw A after takeoff in the TX or in the unit?
//Lars


Top
 Profile  
 
 Post subject: Re: Stabi Rescue
PostPosted: Fri 14. Feb 2020 15:12:56 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
Hi,

possibly you can program Alarm in your radio so that it will not turn on if you will forget to set switch in a wrong position.

Anyway preflight control is always highly recommended. At least to check if everything is moving properly.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Stabi Rescue
PostPosted: Fri 14. Feb 2020 17:16:53 
Offline

Joined: Thu 05. Oct 2017 20:06:35
Posts: 305
@ZeXx86 Please add software so stabi is on a SWITCH not a bank.

Banks should not be required to switch between different stabi modes.

A switch for stabilisation/rescue/normal would be much better than messing with banks, imho.


Top
 Profile  
 
 Post subject: Re: Stabi Rescue
PostPosted: Sat 15. Feb 2020 11:27:40 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
Hi again
I removed stabi from bank0,insted i have lover the rotation speed on both cyclik and rudder,and add some
expo in tx.
Then i only have to use sw A for rescue bank 1 2,and put swA on check Before flight.
Hopfully i dont need to use swA at all,
Thank you all
//Lars


Top
 Profile  
 
 Post subject: Re: Stabi Rescue
PostPosted: Mon 17. Feb 2020 14:39:00 
Offline

Joined: Fri 31. Jan 2020 21:41:56
Posts: 19
jjuk wrote:
@ZeXx86 Please add software so stabi is on a SWITCH not a bank.

Banks should not be required to switch between different stabi modes.

A switch for stabilisation/rescue/normal would be much better than messing with banks, imho.


I think the same. Its really uncomfortable with banks...even more because switching banks have delay...I totaly dont understand why.
We should be able to use stabilisation and rescue in the same time too...if everything was possible to assign to a switch we could easily set everything in radio as we like and as we want. ;)


Top
 Profile  
 
 Post subject: Re: Stabi Rescue
PostPosted: Tue 18. Feb 2020 22:40:29 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
There is zero delay between bank switching.
Possibly only delay might be visible when Spirit Settings is opened. But during flight it is always instant change.

Yes, we are working on switching modes without banks.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Stabi Rescue
PostPosted: Wed 19. Feb 2020 10:57:10 
Offline

Joined: Thu 05. Oct 2017 20:06:35
Posts: 305
ZeXx86 wrote:

Yes, we are working on switching modes without banks.


Fantastic.


Top
 Profile  
 
 Post subject: Re: Stabi Rescue
PostPosted: Wed 19. Feb 2020 13:42:26 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
ZeXx86 wrote:
There is zero delay between bank switching.
Possibly only delay might be visible when Spirit Settings is opened. But during flight it is always instant change.

Yes, we are working on switching modes without banks.


Fantastic,Thanks Tomas


Top
 Profile  
 
 Post subject: Re: Stabi Rescue
PostPosted: Wed 19. Feb 2020 16:02:04 
Offline

Joined: Fri 31. Jan 2020 21:41:56
Posts: 19
ZeXx86 wrote:
Yes, we are working on switching modes without banks.

Glad to hear that. :D
ZeXx86 wrote:
There is zero delay between bank switching.
Possibly only delay might be visible when Spirit Settings is opened. But during flight it is always instant change.

OK I observed the problem only in settings but I then was afraid about using it in flight. (I wanted to make rescue possible in all modes even when stabilisation is active...by switch witch would activate stabi function and switch to bank with rescue at the same time...but the delay would be a problem) ;)
So there is one improvised solution if there isnt delay...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .